Model : PN Series


High gap structure
Equipped with a multi vane impeller with high gap structure which has a good passage characteristic and high pumping performance, these pumps are ideal to transfer or discharge wastewater containing impurities.

Lightweight and corrosion-resistant
Being made of stainless steel and special resin, these pumps are lightweight but corrosion free as well.

Dual inside mechanical seal
The pump is furnished with a dual inside mechanical seal located completely in an oil chamber. This seal system does not rely on the pumped media for the lubrication and cooling, which increases the reliability of the sealing.

Anti-wicking cable entry
The pump has a rubber molded anti-wicking block at the cable entry section of the pump. This unique feature protects the motor from the ingress of water that may be caused by damage to the sheath of the cable.

Motor protection device
A CTP is installed in its motor. It automatically stops the motor in case of an excessive heat buildup in the motor caused by blockage of impeller or by other overloading factors.

Back pullout design
Unfastening the bolts between the oil casing and the pump casing allows the body to be separated into the pump section and the motor section with the impeller left in position. This makes the inspection or cleaning of the impeller easier.

Automatic type available
An automatic or auto-alternation version is available. Refer to the below chart for the availability.

Can be converted to a guide rail fitting version
The pump can be converted to a guide rail fitting version by employing the TOK guide rail fitting kit (*) in combination. (*Option)

  • As a drainage pump in a packaged small-scale sewage treatment plants
  • Drainage of wastewater in buildings and factories
  • Drainage of rainwater/groundwater from cellar or basements
  • Waterscape or agricultural irrigation
Visitors: 30,451